A commercial quality fire proof caulk. Forms a durable bond to all common building materials. Rated for 3000º degrees, Non-toxic, Zero VOC’s, Accepted by the Green Building Council, Approved by the Energy Star Program and certified by UL.
Item #: 50011 (10.5 oz); 50029 (1 quart); 50128 (1 gallon); 50640 (5 gallon)
Stove-Seal is a ready to use premium, fireproof, non-shrinking, non-cracking, acid resistant refractory cement designed for sealing, repairing and bonding fireplaces, furnaces, stoves, fireboxes, flue pipes, fire bricks, kilns, ducts, heaters, boilers and other extreme high temperature applications. Stove-Seal can be used to bond rope seals to combustion chamber access doors and many other furnace and refractory applications.
Item #: 10011 (10.5 oz); 10640 (1 gallon)
FIRE AND DRAFT SEALER
Residential ASTM-E136 UL Classified non-combustible sealant rated for 2000 degrees F for 4 hours. It will not smoke, flame or burn below specified ratings. Formulated to seal interior construction voids around HVAC ducts, masonry, plumbing, wiring and other framing gaps. Easily applied with manual or power caulking equimpment, putty knife or trowel.
Item #: 20111 (10.5 oz); 30029 (1 quart); 30128 (1 gallon); 30640 (5 gallon)
Accepted by the Green Building Council (1 LEED POINT)
Approved by the US Department of Energy & EPA’s Energy Star Program
Certified by Underwriters Laboratories
Selected for use by the Space Program
3000° F For 8 Hours
ASTM-E84 0 FLAME / 0 SMOKE
Unaffected By Freeze/Thaw
Bonds To Most Materials
Water Based: Easy clean up. No special handling. Routine disposal.
Non Shrinking: Will not shrink or crack during curing.
Paintable: When cured, STOVE SEAL™ can be painted with commonly used types of paint, including epoxy. For best results allow 72 hours at full service temperature to cure before painting.
Contains no asbestos or PCB’s.